Grasp Stability Analysis with Passive Reactions

Despite decades of research robotic manipulation systems outside of highly-structured industrial applications are still far from ubiquitous. Perhaps particularly curious is the fact that there appears to be a large divide between the theoretical grasp modeling literature and the practical manipulation community. Specifically, it appears that the most successful approaches to tasks such as pick-and-place or grasping in clutter are those that have opted for simple grippers or even suction systems instead of dexterous multi-fingered platforms. We argue that the reason for the success of these simple manipulation systemsis what we call passive stability: passive phenomena due to nonbackdrivable joints or underactuation allow for robust grasping without complex sensor feedback or controller design. While these effects are being leveraged to great effect, it appears the practical manipulation community lacks the tools to analyze them. In fact, we argue that the traditional grasp modeling theory assumes a complexity that most robotic hands do not possess and is therefore of limited applicability to the robotic hands commonly used today. We discuss these limitations of the existing grasp modeling literature and setout to develop our own tools for the analysis of passive effects in robotic grasping. We show that problems of this kind are difficult to solve due to the non-convexity of the Maximum Dissipation Principle (MDP), which is part of the Coulomb friction law. We show that for planar grasps the MDP can be decomposed into a number of piecewise convex problems, which can be solved for efficiently. Despite decades of research robotic manipulation systems outside of highlystructured industrial applications are still far from ubiquitous. Perhaps particularly curious is the fact that there appears to be a large divide between the theoretical grasp modeling literature and the practical manipulation community. Specifically, it appears that the most successful approaches to tasks such as pick-and-place or grasping in clutter are those that have opted for simple grippers or even suction systems instead of dexterous multi-fingered platforms. We argue that the reason for the success of these simple manipulation systemsis what we call passive stability: passive phenomena due to nonbackdrivable joints or underactuation allow for robust grasping without complex sensor feedback or controller design. While these effects are being leveraged to great effect, it appears the practical manipulation community lacks the tools to analyze them. In fact, we argue that the traditional grasp modeling theory assumes a complexity that most robotic hands do not possess and is therefore of limited applicability to the robotic hands commonly used today. We discuss these limitations of the existing grasp modeling literature and setout to develop our own tools for the analysis of passive effects in robotic grasping. We show that problems of this kind are difficult to solve due to the non-convexity of the Maximum Dissipation Principle (MDP), which is part of the Coulomb friction law. We show that for planar grasps the MDP can be decomposed into a number of piecewise convex problems, which can be solved for efficiently. We show that the number of these piecewise convex problems is quadratic in the number of contacts and develop a polynomial time algorithm for their enumeration. Thus, we present the first polynomial runtime algorithm for the determination of passive stability of planar grasps. For the spacial case we present the first grasp model that captures passive effects due to nonbackdrivable actuators and underactuation. Formulating the grasp model as a Mixed Integer Program we illustrate that a consequence of omitting the maximum dissipation principle from this formulation is the introduction of solutions that violate energy conservation laws and are thus unphysical. We propose a physically motivated iterative scheme to mitigate this effect and thus provide the first algorithm that allows for the determination of passive stability for spacial grasps with both fully actuated and underactuated robotic hands. We verify the accuracy of our predictions with experimental data and illustrate practical applications of our algorithm. We build upon this work and describe a convex relaxation of the Coulombfriction law and a successive hierarchical tightening approach that allows us to find solutions to the exact problem including the maximum dissipation principle. It is the first grasp stability method that allows for the efficient solution of the passive stability problem to arbitrary accuracy. The generality of our grasp model allows us to solve a wide variety of problems such as the computation of optimal actuator commands. This makes our framework a valuable tool for practical manipulation applications. Our work is relevant beyond robotic manipulation as it applies to the stability of any assembly of rigid bodies with frictional contacts, unilateral constraints and externally applied wrenches. Finally, we argue that with the advent of data-driven methods as well as theemergence of a new generation of highly sensorized hands there are opportunities for the application of the traditional grasp modeling theory to fields such as robotic in-hand manipulation through model-free reinforcement learning. We present a method that applies traditional grasp models to maintain quasi-static stability throughout a nominally model-free reinforcement learning task. We suggest that such methods can potentially reduce the sample complexity of reinforcement learning for in-hand manipulation.We show that the number of these piecewise convex problems is quadratic in the number of contacts and develop a polynomial time algorithm for their enumeration. Thus, we present the first polynomial runtime algorithm for the determination of passive stability of planar grasps.